





A wide range of in-line feeders are being offred with the smallest one weighing 0.25 kg in total and the largest one mass 17 kg in total with a maximun permissible chute mass of 5 kg and the maximun chute length of 700 mm. The most recognizable feature is that, by setting the controller frequency, the necessity of adjusting the leaf spring is eliminated. Any directly mounted, internediate spring, and rubber-support equipeped types maybe selected according to the application.
Directly mounted type
A simple construction. The highest feed rate is attainable. As the reactive force is directly transmitted to the mounting frame, however, this type is limited to compact feeders.
Rubber support equipped type
The feeder is fixed to the frame with rubber supports to significantly reduce the reactive force so that it can even be used on a regular office-type desk. Suitable for high-speed feeding of medium and large sized workpieces.
Intermediate spring type
The feeder is installed between the drive unit and the mounting frame via an intermediate spring to reduce the reactive force applied to the frame. Capable of smoothly feeding medium and large-sized workpieces with less vibration.

A simple construction. The highest feed rate is attainable. As the reactive force is directly transmitted to the mounting frame, however, this type is limited to compact feeders.

The feeder is fixed to the frame with rubber supports to significantly reduce the reactive force so that it can even be used on a regular office-type desk. Suitable for high-speed feeding of medium and large sized workpieces.

The feeder is installed between the drive unit and the mounting frame via an intermediate spring to reduce the reactive force applied to the frame. Capable of smoothly feeding medium and large-sized workpieces with less vibration.

The Daishin Linear Feeder FF Series reduce vibration by flat springs and a balance weight, held between the vibrator and mounting base, that absorb reaction force. These linear feeders are best suited to high-speed conveyance of small and thin precision parts.

The B-series Daishin Linear Feeders, which minimize vibration by rubber vibration isolator held between the vibrator and mounting base, can be installed in all sorts of environment. These are widely used linear feeders.